1 General
- 1.1 Certifications
- 1.2 Scope of Data/Data Formats
2 Applications & Solutions
3 PCB Technologies
- 3.1 HDI/SBU PCB
- 3.2 Multilayer PCB
- 3.3 High-Frequency PCB
  - 3.3.1 High-Frequency | General
  - 3.3.2 High-Frequency | Design Rules
- 3.4 Heavy Copper PCB
- 3.5 Iceberg PCB
  - 3.5.1 Iceberg | General
  - 3.5.2 Iceberg | Design Rules
- 3.6 HSMtec® PCB
- 3.7 Copper IMS PCB
- 3.8 Rigid-Flex PCB
- 3.9 Semi-Flex PCB
- 3.10 Embedded Technology
  - 3.10.1 Embedded | General
  - 3.10.2 Embedded | Design Rules
- 3.11 Double-Sided PCB
4 Base Materials
5 Sub-Panel Design/Panel Formats
6 Markings
7 Mechanical and Laser Processes
8 Rules Holes/Conductive Pattern
9 Masks/Additional Printing
10 Solder and Bond Surfaces
11 Via Sealing Technologies
12 Advanced Technologies
13 Impedance
14 Testing Procedures/Quality Control
- 14.1 Electrical Test
- 14.2 Quality Control
15 Packaging/Processing
- 15.1 Packaging Variants
- 15.2 Processing Recommendations
16 Design Solutions/Recommendations
17 Services/Useful Tools

ksg-pcb.com Contact Support

DE | EN

Log In

Register Forgot password?

Imprint Data protection

Design Compass

8.3 Design Rules | Microvia

This article is for registered users

“8.3 Design Rules | Microvia” is part of the detailed design-rules content of the Design Compass. Register for free – once your account is activated, you’ll have access to all articles, watchlists and the Panel Planner.

Register for free Already registered? Log In

Go to the next entry

You have questions?

+49 3721 266-555
ts@ksg-pcb.com
Go to the contact form

Optimized for desktop

The Design Compass is optimized for use on a desktop computer. For the best display and access to all features, we recommend using it there.