1 General
- 1.1 Certifications
- 1.2 Scope of Data/Data Formats
2 Applications & Solutions
3 PCB Technologies
- 3.1 HDI/SBU PCB
- 3.2 Multilayer PCB
- 3.3 High-Frequency PCB
  - 3.3.1 High-Frequency | General
  - 3.3.2 High-Frequency | Design Rules
- 3.4 Heavy Copper PCB
- 3.5 Iceberg PCB
  - 3.5.1 Iceberg | General
  - 3.5.2 Iceberg | Design Rules
- 3.6 HSMtec® PCB
- 3.7 Copper IMS PCB
- 3.8 Rigid-Flex PCB
- 3.9 Semi-Flex PCB
- 3.10 Embedded Technology
  - 3.10.1 Embedded | General
  - 3.10.2 Embedded | Design Rules
- 3.11 Double-Sided PCB
4 Base Materials
5 Sub-Panel Design/Panel Formats
6 Markings
7 Mechanical and Laser Processes
8 Rules Holes/Conductive Pattern
9 Masks/Additional Printing
10 Solder and Bond Surfaces
11 Via Sealing Technologies
12 Advanced Technologies
13 Impedance
14 Testing Procedures/Quality Control
- 14.1 Electrical Test
- 14.2 Quality Control
15 Packaging/Processing
- 15.1 Packaging Variants
- 15.2 Processing Recommendations
16 Design Solutions/Recommendations
17 Services/Useful Tools

ksg-pcb.com Contact Support

DE | EN

Log In

Register Forgot password?

Imprint Data protection

Design Compass

3.8.8 Rigid-Flex PCB | Further Layer Stackups

This article is for registered users

“3.8.8 Rigid-Flex PCB | Further Layer Stackups” is part of the detailed design-rules content of the Design Compass. Register for free – once your account is activated, you’ll have access to all articles, watchlists and the Panel Planner.

Register for free Already registered? Log In

Next entry:

3.8.9 ZIF – Zero Insertion Force

Go to the next entry

You have questions?

+49 3721 266-555
ts@ksg-pcb.com
Go to the contact form

Optimized for desktop

The Design Compass is optimized for use on a desktop computer. For the best display and access to all features, we recommend using it there.